|
Control StationECS is an electronic control station that governs the pneumatic actuators. Each actuator is controlled by an I/P-converter with a control signal of 0.4 to 2 bar (6 - 30 psi). Setpoints are sent from the VIB Control StationIPS using measurement system data.
Control StationIPS is an integrated process station that serves as the central process point for the system. It contains the integrated MD/CD control, the operator visualization package, PLC functions and the intelligence to control the entire actuator control system.
Benefits for the Paper Industry
- Increased gloss for improved new grades.
- Flatter gloss profiles and caliper profile can be achieved simultaneously.
- Control of two-sideness by using VIB GlossTech on top and underside.
- Narrow spacing of the actuator can be adjusted to produce the desired profiling effect.
- Optional feedback of the actuator position ensures reliable functioning of the VIB GlossTech Actuator.
- Better edge performance for improved reel building.
- Gloss increase for LWC grades from 5 - 10%.
- Gloss increase for SC grades from 6 - 12%.
- CD gloss 2-sigma improvement of 60%.
- 3 - 4% increase in efficiency of the total production line with integrated gloss control.
|
 Every point of gloss increases the quality and thus the value of paper, which guarantees a quick return on your VIB GlossTech systems investment.
Technical Features
- Steam dryer header in cross direction.
- Steam heating system.
- Diffuser plate of special material.
- Integrated CD and MD control including PLC functionalities (interlocks, loops).
- Profiling zone spacing down to 75 mm gives high profiling capability.
- Rigid construction, 316 Ti stainless steel.
- LAN or Serial Link protocol for connection to the measurement system. Activated by mouse click.
Page  2 of 3 
|
