|
Control StationECS is an electronic control station that governs the pneumatic actuators. Each actuator is controlled by an I/P-converter with a control signal of 0.4 to 2 bar (6 - 30 psi). Setpoints are sent from the control station.
Control StationIPS is an integrated process station that serves as the central process point for the system. It contains the integrated control, the operator visualization package, PLC functions and the intelligence to control the entire actuator control system.
Benefits for the Converting Industry
- Increased sheet moisture for higher quality grades.
- Flatter profiles and moisture control can be achieved simultaneously.
- Narrow spacing of the actuator can be defined based on sheet flatness.
- Better edge performance.
- Moisture increase of 1.5 - 2% by using single side application.
- Moisture increase of 2 - 3% by using double side application.
- Moisture control on siliconized paper.
- Moisture control on coated paper.
- Increase in the efficiency of the total production line with integrated moisture control.
|
 Advanced Actuator Control System Layout
Technical Features
- Steam dryer header in cross direction.
- Steam heating system.
- Diffuser plate heating.
- Steam heated dwell zone.
- Integrated control including PLC functionalities (interlocks, loops).
- Profiling zone spacing down to 75 mm gives high profiling capability.
- Rigid construction, 316 Ti stainless steel.
Page  2 of 3 
|
