|
Benefits for the Converting Industry
- Higher output and a flatter moisture profile can be achieved simultaneously.
- Better edge performance.
- Reel average moisture increased by 0.5 - 4.0%.
- Energy savings produced from a consistent moisture profile and higher average moisture.
- Improved tension profile.
- Higher caliper and a flatter caliper profile.
Technical Features
- Advanced patented two-stage nozzle applies a highly atomized, low-pressure spray mist to the sheet
- Profiling zone spacing down to 25 mm gives high profiling capability
- Constant air flow through the nozzles keeps them free from broke and debris
- Integrated control system with PLC (Allen Bradley or Siemens S7)
|
Technical Specifications
Nozzle Orifices
2 to 5 mm (non-clogging)
Nozzle Spray Capacity
min. 0.2 - 4 l/h each nozzle
max. 2 - 30 l/h each nozzle
The System consists of:
- spray boom
- control station
- air supply unit
- water supply unit
- moisture / temperature measurement
QCS Family (Quality Control Systems)
WarpTek – heat control system
WarpTekPlus – heat and moisture control system
SpeedTek – speed optimization
GlueTek – autometering gap control
Page  2 of 3 
|
